Vertical bearing housing

UCP200 series

This product is the most typical and commonly used type of outer spherical bearing with seat, and is suitable for all transmission devices and machinery with the shaft parallel to the mounting surface. It has sufficient strength and rigidity when used.

UCP300 series

This product is the most typical and commonly used type of outer spherical ball bearing with seat, and is suitable for all transmission devices and machinery with the shaft parallel to the mounting surface. The load is larger than that of UCP200.

UCPH200

The usage and purpose of UCPH200 are the same as those of UCP200, except that the center height of the shaft is higher than that of the ordinary vertical seat

UCPA200

There are two mounting screw holes at the bottom of the seat, and the width is greatly compressed, which is suitable for parts with limited installation area.

square seat

UCF200

This type of product is generally installed on the side wall of the machine, with simple structure and convenient installation, and is suitable for heavy load occasions. It is the most widely used type of flanged housing.

UCF300

This type of product is generally installed on the side wall of the machine. It has a simple structure and is easy to install. It is the most widely used type of flanged bearing seat. The load it bears is larger than that of the UCF200.

Diamond seat

UCFL200

This type of product is light in structure and easy to install, and is suitable for installation in transmission parts with a small area. The center distance of the two bolt holes is the same as the center distance of the diagonal bolt holes of the same type of square seat, so it can replace the square seat.

UCFL300

This type of product is light in structure and easy to install, and is suitable for installation in transmission parts with a small area. The center distance of the two bolt holes is the same as the center distance of the diagonal bolt holes of the same type of square seat, so it can replace the square seat. The load it bears is larger than that of the UCFL200.

UCFA200

A variant of the diamond-shaped seat. Change one of the bolts to an arc slot centered in the other hole as well. Therefore, the position of the shaft center can be adjusted within a certain range.

Hanging seat

UCFB 200

A variant of the diamond-shaped seat, the three mounting bolt holes are concentrated on one side of the seat. It is suitable for parts where the installation surface is in a vertical state, and can be used instead of a vertical seat.

Slider seat

UCT200

There are two chutes on the top and bottom of the seat. Can move back and forth on the rack. Therefore, it is most suitable for occasions where the distance between axes needs to be adjusted. The axis of the machine can also move during operation. Mostly used on belts, chains and other transmission shafts.

UCT300

Same usage as UCT200. The load it bears is larger than that of the UCT200.

Boss round seat

UCFC200

This type of product seat has a circular boss on the bottom, which can be placed in the round hole of the rack, so the installation accuracy is high and the positioning is accurate.

Boss square seat

UCFS300

The usage is the same as that of UCFC200. The switches and positions of the mounting holes are different.

Ring seat

UCC200

The outer diameter of the bearing seat is cylindrical, and the coaxiality with the shaft is better after grinding. The whole can be used as a set of bearings. At the same time, it can move freely in the axial direction, and is mostly used on the free side with greater flexibility.

UCC300

Usage and usage are the same as UCC200. The load it bears is larger than that of the UCC200 type.

Pendant seat

UCHA200

The screw holes on the upper end of the seat are processed into pipe threads, which are used in hoisting occasions.

Stamping – vertical seat

SBPP200

The precision stamping surface of cold-rolled steel plate becomes the upper and lower half-separated bearing housing with simple structure, convenient installation and light weight. It is especially suitable for all the agricultural machinery with light load and low-speed operation with the shaft parallel to the installation surface.