SB205-14 Crowned Outer Insert Bearing With Set Screw 7/8inchx52mmx27mm

The spherical outer surface of the outer ring can compensate misalignment if it is installed in a corresponding housing

If you want to know more details, please feel free to contact us.

    SB205-14 Spherical or Crowned Insert Ball Bearing With Set Screw, pre-lubricated with Grease

    Sizes: ID 7/8inch x OD 52mm x W 27mm


    with extended inner ring and grub screws for fixing the inner ring on a shaft

    suitable for mounting in a housing bearing

    suitable for high loads

    seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect

    If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions


    TypeShaft in mmDImensions in mmWeight (Kg)
    SB 201-2RS121240226164.5M5X0.80.1
    SB 202-2RS151240226164.5M5X0.80.1
    SB 203-2RS171240226164.5M5X0.80.1
    SB 204-2RS201447257184.53.9M6X1.00.15
    SB 205-2RS251552277.519.55.53.9M6X1.00.18
    SB 206-2RS301662308225.55M6X1.00.27
    SB 207-2RS351772328.523.56.55.5M8X1.00.42
    SB 208-2RS4018803492576M8X1.00.6
    SB 209-2RS45198541.29.531.78.26.3M8X1.00.8
    SB 210-2RS50209041.61031.69.26.5M8X1.00.83
    SB 211-2RS552310045.311.833.59.87.2M8X1.01.1
    SB 212-2RS602411053.714.938.89.88M10X1.251.3