SB206-2RS Crowned Outer Insert Bearing With Set Screw 30x62x30mm

The bearing insert SB206-2RS can be easily attached to the shaft with the grub screws or inserted in a housing. It is suitable for high radial loads. Main dimensions according to DIN 626-1.

If you need to apply for a sample, you can click the button below.

    SB206 Spherical or Crowned Insert Ball Bearing with Set Screw, pre-lubricated with Grease. Lubricated for life; under normal operating conditions relubrication is not required

    SB206 Insert Ball Bearing


    with extended inner ring and grub screws for fixing the inner ring on a shaft

    suitable for mounting in a housing bearing

    suitable for high loads

    seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect

    If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions


    TypeShaft in mmDImensions in mmWeight (Kg)
    SB 201-2RS121240226164.5M5X0.80.1
    SB 202-2RS151240226164.5M5X0.80.1
    SB 203-2RS171240226164.5M5X0.80.1
    SB 204-2RS201447257184.53.9M6X1.00.15
    SB 205-2RS251552277.519.55.53.9M6X1.00.18
    SB 206-2RS301662308225.55M6X1.00.27
    SB 207-2RS351772328.523.56.55.5M8X1.00.42
    SB 208-2RS4018803492576M8X1.00.6
    SB 209-2RS45198541.29.531.78.26.3M8X1.00.8
    SB 210-2RS50209041.61031.69.26.5M8X1.00.83
    SB 211-2RS552310045.311.833.59.87.2M8X1.01.1
    SB 212-2RS602411053.714.938.89.88M10X1.251.3