SER206 Insert Ball Bearing with Snap Ring and Set Screw 30mm Shaft, ER106
SER206-30mm Insert Ball Bearing with Set Screw and Snap Ring on Outer Race, Sealed and pre-lubricated with Grease
If you want to know more details, please feel free to contact us.
This insert type is a fully sealed bearing with a parallel outer diameter and comes fitted with a snap ring, they have the benefit of being re-lubricatable after installation. There are 2 grub screws to allow tightening against the shaft once fitted.
Feature
Standard load capacity
Relubrication groove with oil hole on side opposite of set screws
Nylon patched class 3A set screws are standard
Standard Seal: R-Seal
Parameter
| Bearing No. | Shaft Dia | Boundary dimensions(mm) | Mass(Kg) | |||
|---|---|---|---|---|---|---|
| in. | mm | D | Bi | Be | ||
| SER201-8 | 1/2 | 47 | 31 | 15.9 | 0.25 | |
| SE R202-10 | 5/8 | 47 | 31 | 15.9 | 0.25 | |
| SER204 | 20 | 47 | 31 | 15.9 | 0.25 | |
| SER204-12 | 3/4 | 47 | 31 | 15.9 | 0.25 | |
| SER205 | 25 | 52 | 34.9 | 19.1 | 0.31 | |
| SER205-14 | 7/8 | 52 | 34.9 | 19.1 | 0.31 | |
| SER205-15 | 15/16 | 52 | 34.9 | 19.1 | 0.31 | |
| SER205-16 | 1 | 52 | 34.9 | 19.1 | 0.31 | |
| SER206 | 30 | 62 | 38.1 | 22.2 | 0.42 | |
| SER206-17 | 1-1/16 | 62 | 38.1 | 22.2 | 0.42 | |
| SER206-18 | 1-1/8 | 62 | 38.1 | 22.2 | 0.42 | |
| SE R206-19 | 1-3/16 | 62 | 38.1 | 22.2 | 0.42 | |
| SER206-20 | 1-1/4 | 62 | 38.1 | 22.2 | 0.42 | |
| SER207 | 35 | 72 | 42.9 | 23.8 | 0.62 | |
| SER207-20 | 1-1/4 | 72 | 42.9 | 23.8 | 0.62 | |
| SER207-21 | 1-5/16 | 72 | 42.9 | 23.8 | 0.62 | |
| SER207-22 | 1-3/8 | 72 | 42.9 | 23.8 | 0.62 | |
| SER207-23 | 1-7/16 | 72 | 42.9 | 23.8 | 0.62 | |
| SER208 | 40 | 80 | 49.2 | 27.8 | 0.91 | |
| SER208-24 | 1-1/2 | 80 | 49.2 | 27.8 | 0.91 | |
| SE R208-25 | 1-9/16 | 80 | 49.2 | 27.8 | 0.91 | |
| SER209 | 45 | 85 | 49.2 | 27.8 | 1.05 | |
| SER209-26 | 1-5/18 | 85 | 49.2 | 27.8 | 1.05 | |
| SER209-27 | 1-11/16 | 85 | 49.2 | 27.8 | 1.05 | |
| SER209-28 | 1-3/4 | 85 | 49.2 | 27.8 | 1.05 | |
| SER210 | 50 | 90 | 51.6 | 28.6 | 1.. 1 | |
| SER210-30 | 1-7/8 | 90 | 51.6 | 28.6 | 1.1 | |
| SER210-31 | 1-15/16 | 90 | 51.6 | 28.6 | 1.1 | |
| SER210-32 | 2 | 90 | 51.6 | 28.6 | 1.1 | |
| SER211 | 55 | 100 | 55.6 | 30.2 | 1.36 | |
| SER211-32 | 2 | 100 | 55.6 | 30.2 | 1.36 | |
| SER211-34 | 2-1/8 | 100 | 55.6 | 30.2 | 1.36 | |
| SER211-35 | 2-3/16 | 100 | 55.6 | 30.2 | 1.36 | |
| SER212 | 60 | 110 | 65.1 | 31.8 | 2.53 | |
| SER212-36 | 2-1/4 | 110 | 65.1 | 31.8 | 2.53 | |
| SER212-38 | 2-3/8 | 110 | 65.1 | 31.8 | 2.53 | |
| SER212-39 | 2-7/16 | 110 | 65.1 | 31.8 | 2.53 | |
| SER213 | 65 | 120 | 65.1 | 32 | 2.9 | |
| SER213-40 | 2-1/2 | 120 | 65.1 | 32 | 2.9 | |
| SER214 | 70 | 130 | 77.8 | 38.1 | 3.6 | |
| SER214-43 | 2-11/16 | 130 | 77.8 | 38.1 | 3.6 | |
| SER214-44 | 2-3/4 | 130 | 77.8 | 38.1 | 3.6 | |
